Munson Machinery launches self-cleaning Rotary Drum Screen

Munson Machinery Company launches a new self-cleaning Rotary Drum Screen (Model 24 RDS 24), which removes solid materials from waste streams at high rates. The unit contains a rotating cylinder that is 24 inch (610 mm) in diameter by 24 inch (610 mm) long, and constructed of wedge wire screen. Effluent discharges from a head box, overflows a dam and flows onto the outside of the rotating cylinder, allowing water to pass through the wedge wire into the cylinder. A doctor blade scrapes sludge and debris collected on the outside of the cylinder, while an internal spray line dislodges particles blinding the screen.

The separator is intended for sewage, food, pulp and paper, rendering, pelletizing and other applications in which solids must be removed from slurries in high volumes.

The variable speed unit is equipped with wedge wire screen in a range of seven orifice sizes from .010 to .100 in. (.25 to 2.54 mm), offering capacities from 757 to 3520 liter/ min respectively....more

Mag Industrial introduces new Vertical Machining Center

The new hydraulic-free NBV Vertical Machining Center from Mag Industrial Automation optimizes energy use to cutting requirements. This compact VMC is flush with modular application flexibility, including configurations for 3-, 4-, and 5-axis contouring or 5-axis mill/turn work, integrated CAM support and program simulation, and four spindle options ranging up to 42,000 rpm.

In addition to its hydraulic-free design, the NBV conserves energy with a selectable ECO-Mode power saving feature that automatically levels speed and acceleration for an ideal balance of cutting performance, energy use and machine-component life. Ideal applications include die/mold, automotive and aerospace impellers and blisks, medical, and general machining.

In a footprint of just 9.6 m² (133.5 sq ft), the fixed-table NBV 400 provides X-Y-Z ranges of 700 x 600 x 500 mm (27.6 x 23.6 x 19.7 in), with table capacity of 300 kg (661 lb) [250 kg/551 lb in mill-turn config.]. Spindle options include speeds of 10,000, 12,000 (mill-turn only), 18,000, 24,000 and 42,000 rpm, offering a torque range of 125 to 12.4 Nm (92 to 9 lb ft) at 40 percent duty. A disc-type 40-tool magazine integrated in the machine bed maximizes in-cut time with fast direct tool change (4.4 sec chip-to-chip), without a separate tool changer. The hydraulic-free system clamps tools with proven disc springs....more

ABB launches High-Performance Infrared (HPIR) Moisture Sensor

ABB introduces its new High-Performance Infrared (HPIR) Moisture Sensor for their QCS800xA Quality Control System (QCS). Intended as a replacement for the very popular HemiPlus moisture sensor, the HPIR is designed to improve the performance and reliability of both new and existing ABB QCS systems. HPIR sensor enhances performance of ABB Quality Control Systems and overall efficiency of papermaking process.

With HPIR, papermakers can have more confidence in the precision of their moisture measurement. They can achieve tighter CD control, and faster start-ups and grade changes. Papermakers can shift their moisture targets closer to acceptable quality limits, saving energy and reducing fiber costs while remaining within the paper grade’s quality specifications....more

Green Dot launches Servo Voltage Stabiliser line

Green Dot Electric introduces Servo Voltage Stabiliser line with micro controller operation and fully digital user friendly LED displays of in-volts, out-volts and load current. It also has protections against single phasing, reverse phasing, low & high voltage cut offs and overload cut offs.

The company has specially developed vertical track variable transformers with ball bearings for shafts, self adjusting & self aligning carbon systems moving on optically ground winding tracks and computerised power designs. This type achieves operation efficiencies as high as 98% even in wide ranges of say 160-480 volts 3 phase & in air cooled versions.

Special units also have been developed for use on unreliable remote rural power lines that sense the three phases & with healthy phase selection system – ensure a continued supply even in case any of the phases have heavy dips in voltages or have frequent phase slips & failures...more

New Hydraulic Excavator from Caterpillar

The new 336D L Hydraulic Excavator from Caterpillar delivers expanded versatility and high productivity in demolition applications. The Cat 336D L has more engine power and hydraulic pressure. The result is increased breakout force and greater lift force, which create faster cycle times and superior productivity.
The 336D L has a maximum operating weight of 37631 kg and net power of 268 horsepower (200 kW). The Cat C9 engine powers the 336D L and meets U.S. EPA Tier 3 emissions regulations. The engine management system provides flexible fuel mapping, allowing the engine to respond quickly to varying application needs. For reduced power consumption and reduced noise, the excavator has a hydraulically driven fan controlled by the electronic control module.
To enhance durability in demolition applications, the 336D L can be equipped with heavy-duty triple grouser tack shoes for long wear and solid traction. Track guards for the sprocket end and idler end are fitted to protect the full length of the track. Rubber bumpers attached to the sides of the excavator reduce inadvertent damage when swinging, and bottom and bearing guards protect those areas from damaging debris....more

DCI distribution station from Sigpack Systems

The DCI distribution station from Sigpack Systems, a Bosch Packaging Technology company has fast operation capability for different range of products, and features easy access for cleaning and maintenance; Output up to 160 products per minute; Quick belt change without tools by swivel drive systems; Distribution station for chocolate bars, biscuits, frozen foods and additional applications.

The side panels of the station can be quickly and easily removed to ensure easy accessibility, and swivel drives allow for a quick and smooth belt change. The new distribution system integrates latest safety and health standards and is available in both left-hand and right-hand versions.

This allows optimum use of the available production area and gives maximum flexibility if the DCI is integrated with other packaging machinery...more

Lenovo's ThinkPad X201 Tablet

Ultra-portable, advanced security features

The new business notebook, ThinkPad X201 tablet, has 12.1-inch touchpad and is light and thin in design. It has highly configurable screen, which includes options for outdoor viewing, capacitive touch and pen input. The navigation is easy with a pen, finger, and keyboard. Security tools include fingerprint reader, anti-theft technologies, and self encrypting hard drives.

The device relies on Intel HD graphics and is rather extensively configurable. The battery life is decent, around 12 hours on a 9-cell battery. It’s equipped with new processor 32nm Core i7-640LM dual-core CPU clocked in at 2.13GHz, and has Windows 7 Professional operating system. It has spill-resistant keyboards, hard-drive protection and durable top and bottom covers.

It weighs around 1kg with the regular 4-cell battery. The screen is capacitive touch and has a special pen for the input feeding. The optional super bright outdoor panel is well suited for indoor and outdoor viewability, even in direct sunlight. It’s available in overseas stores and is likely to be launched in India somewhere in April 2010.

Easily convertible from laptop to touch screen tablet

The Eee PC T91MT from ASUS has multi-touch, swivelling 8.9'' screen and can be used in standard laptop and touch screen tablet mode. Its easy-to-use touch screen, with the command of finger, makes web navigation intuitive and effortless.

It allows easy navigation, zoom in & out, and flick & rotate view of the content. The user gets on-the-go access to data with a shock-resistant 32GB SSD hard drive and 500GB of Eee online storage. The sleeve case is perfect for easy and comfortable carrying.

The display can be twisted to 180 degrees and folded like a laptop. The user can twist the screen to change it to a touch screen tablet mode, thus allowing easy two-finger content access. The T91MT has a battery life of up to five hours and weighs around 1kg. It has energy-efficient Intel Atom Z520 1.33 GHz processor, Memory 1GB DDR2 RAM (2GB maximum), Bluetooth compatible, exclusive ASUS Super Hybrid Engine, Windows 7 OS, and LED-backlit display. These attributes make it a versatile device for reading e-books, store and share photos, take important notes using keypad or the stylus.

LVD launches Press Brakes (PPEC-6 & PPEC-7)

LVD’s new PPEC press brakes, including PPEC-6 and PPEC-7 models, have capacities from 80 tons, 2 meters up to 220 tons, 4.2 meters with four to seven CNC controlled axes, depending upon machine model.

PPEC press brakes provide a rugged and welded one-piece frame machined without repositioning, which guarantees machine precision. Hydraulic cylinders are machined from a solid steel billet. Pistons are steel forgings, precision ground and micropolished for years of trouble-free service.

Microprocessor Technology is linked to servo-controlled state-of-the-art hydraulics and electronics to ensure perfect control of the bending process and optimum precision. Double bed referenced encoders are connected to the bed in such a way that deformation of the side frames during bending does not influence the positioning accuracy of 0.01 mm of the upper beam (Y1-Y2)....more

Atlas Copco launches new Underground Rock Drills

The new range of silent Rock Drills from Atlas Copco is ideal for tough applications in underground drilling. This modified rock drills have passed the ATEX process standard and now fully complies with ATEX directive.

Atlas Copco has launched a range of three silenced rock drills, the sound power levels of the BBC 16 WS, BBD 34 WS and BBD 94 WE have been reduced by 5-8 dB(A), depending on the model. The new models are designed for fast & reliable surface and underground rock drilling.

Some technical modifications have contributed to achieve compliance with ATEX directive for the BBD 94 WS model together with BMK 91RS pusher leg. These light rock drill has passed the whole process specifications according to directive 94/9/EC. ATEX directive consists of two EU directives describing what equipment and work conditions are allowed in an explosive atmosphere....more

Automatic Air Spray Gun from Graco

Graco introduces the new AirPro EFX automatic air spray gun, an innovative solution designed for precision finishing in the small component finishing market. The AirPro EFX is a complete line of air spray automatic guns with optimized performance at low flow rate.

The AirPro EFX compact and lightweight guns have aircaps and nozzles that are specifically designed to deliver superior spray performance for the small components market, which includes electronics, automotive and general metal.

In addition, each gun is shipped with a serialized spray pattern imaging report that includes an actual spray pattern photo produced using laser-light sheet imaging. This allows users to not only see the high quality of the spray pattern with their own eyes, but also view a report that lists spray pattern benchmarks that each gun must comply with before shipping...more

Bodine Electric introduces its new WX gearhead

Bodine Electric Company introduces its new WX gearhead in conjunction with its upgraded 34B-frame brushless DC motor. The WX is a new high-torque gearhead built to provide longer life and higher performance than similar gearmotors in the same size range. The new WX gearmotors are designed to drive applications such as conveyor systems, packaging equipment, metering pumps, medical devices, commercial appliances, and solar powered outdoor equipment.

The exterior of the new WX gearhead is identical to Bodine’s old W models, but the inside has been completely redesigned. These new WX gearmotors feature all-steel helical gear trains and synthetic lubricants, allowing the type 34B-WX to produce up to 65% more torque than previous models. The new steel gearing is designed to AGMA 9 standards or higher, to assure the quiet operation that is expected from Bodine Electric products. The synthetic lubricant in this new gearhead improves efficiency, and allows these gearmotors to operate in a wide temperature range. Forty-eight new stock models feature 12 available gear ratios, ranging from 4:1 to 312:1, and rated output speeds from 658 to 8 RPM....more

 

Programmable Stripping Machine by Schleuniger

Schleuniger has announced the launch of UniStrip 2300 Programmable Stripping Machine. This stripping machine does not require any mechanical adjustments to process different wire sizes. Using the colour touch-screen interface, the user selects the desired wire size from the pre-programmed library and all parameters (cutting diameter, clamping pressure, blade wayback, etc.) are automatically set.

The innovative UniStrip 2300 is the only machine in its class that is fully programmable. The intuitive user interface makes it easy for the novice user to learn and operate the machine in minutes. All settings can be password protected and different user levels make it possible to control who makes changes to program data and configuration settings.

After calling up the desired wire size, the operator inserts the wire into the machine to initiate the stripping cycle. The sensitivity of the trigger sensor is automatically set according to the selected wire size, allowing very fine wires to be processed without requiring the optional foot pedal. The short cycle time of 0.35 sec makes the UniStrip 2300 suitable for high volume production....more

New Laser Tracker from Leica Geosystems

Hexagon Metrology has announced the availability of Leica’s Absolute Tracker AT401. The new AT401 is a highly accurate portable CMM for 3D measurements over ultra long ranges. It is the first laser tracker to be battery operated and designed for cable-less operation.

With a weight of only 8 kg including controller, a height of just 29 cm and a minimal configuration that allows it to be transported as carry on luggage on most large international airliners, the new Leica Absolute Tracker AT401 sets a new level of portability in the industry. This all new laser tracker incorporates an advanced power management system that allows the batteries to be hot swapped as well as the system to be run off of Power over Ethernet (PoE+).

The Leica Absolute Tracker is IP54 certified and includes enhanced features such as PowerLock and Automatic Target Recognition (ATR) that make it the easiest to use 3D Leica Absolute Tracker ever created....more

 

Damalini AB launches Easy-Laser E710 – Shaft Alignment System

Damalini AB launches the new Easy-Laser E710 – a Shaft Alignment System. This innovative and technologically advanced system has functions for all the stages of machine setup to check the flatness of the machine base, check any bearing play and soft foot, and aligning the machine.

With Easy-Laser E710, user can also align sheaves and pulleys with digital precision and check vibration levels. One new feature is the barcode reader, which enters the machine dimensions with literally one swipe. Large, clear colour screen, wireless measuring units (included as standard), long operating life and robust design give a measurement system that is both reliable and easy to use.

The Easy-Laser E710 gives machines all the conditions for optimal service life. Expensive unplanned stoppages can often be avoided. Aligned machines also reduce energy consumption and reduce the need for replacement parts. It is profitable for client’s operation, and makes an important contribution to sustainable development and a better environment....more

 

Notion Ink's Adam: India's version of Tablet

Developed in collaboration with Delhi IIT students, Notion Ink's Adam is India's version of a Tablet. A new entrant in the tablet bandwagon, it boasts a battery life of 16 hours (160 hours when the back light is off) which is nearly double as compared to other rival products. It runs on a dual core 1 GHz processor, has a 3MP camera, and offers an amazing viewing experience with 1080p HD videos support.

It comes with Wi-Fi, 3G and Bluetooth and makes multitasking easy and effortless. It runs Mozilla Firefox and Chrome browser, and has features like proximity sensor, an accelerometer, ambient light sensor, a touchpad and an SD card slot. Whether it meets the expectation of users or outperforms other technology will be evident after its release in the US and India in the later half of 2010.

Feather-touch Web browsing & e-mailing

The latest from the Apple stable. It combines the best of eBook reader and conventional laptop features. It has high-resolution 9.7-inch LED-backlit IPS displays, which is good for web browsing, photo viewing, e-book reading and watching movies. It is available in flash storage of 16GB, 32GB and 64GB. At one-charge, its battery lasts for up to 10 hours - ideal for web surfing on Wi-Fi, watching videos and listening to music.

The iPad’s large multi-touch screen is well suited for browsing and its large, onscreen keyboard makes drafting email a pleasurable experience. It also has a dock which can be attached to external full-size keyboard. It is well-suited for reading books and iBook app can be downloaded for free from the App Store.

The photos can be flipped, zoomed in or out and can be imported by connecting to a computer or directly to a digital camera. With the iPod app, music is literally on fingertips. But, it doesn't have an in-built camera which is the main drawback of the device. It is expected to be available in the US from April 3, 2010.  The iPad will also be available in a 3G model with fast data speeds up to 7.2 Mbps.

Shivsu launches Desalination Plants

Shivsu Canadian Clear International Ltd. has come out with improved technology in desalination plants that offer solutions to pure water needs at low cost and reduced initial investment. The new plants are capable of converting sea water or any brackish water into usable one. Its conversion capacity ranges from a minimum of 10,000 litres to 100 million litres per day.

The new desalination plants working on cutting edge technology of Reverse Osmosis are capable of producing superior quality potable water.

The plants are ABWA, TUV and BWW certified for quality. State-of-the-art technology and hi-tech supports ensure endurance to vibration when running the plant and while shifting the container from one place to another. High durability allows the plants to run 24x7 and proper maintenance assures long-term benefits. Engineered to incorporate concurrent technologies, these plants come with skid-mounted units and hence require only a minimum space for installation....more 

Ingersoll Rand introduces new Cordless Drill

Ingersoll Rand has launched D650S and D550S 1/2" Cordless Drill / Drivers. The D650S delivers a best-in-class power-to-weight ratio with an industry-leading 73 Nm of ideal stall torque whilst the D550S delivers an impressive 62 Nm of ideal stall torque.

The new drill / drivers have been developed to replace the D550 and D650 tools after much user feedback and consultation. Aimed at automotive and industrial professionals, the D650S and D550S have lightweight designs, weighing only 2.0 kg and respectively, yet still providing exceptional power.

The new 1/2" drill / drivers also use the latest Lithium Ion battery technology. Constructed with superior high density cell technology, all IQV batteries offer best-in-class recharge life in addition to the patent-pending IQV twistlock interface. The twist-to-lock design outperforms conventional batteries in durability and convenience by preventing normal wear and tear to mounts and clips and utilizing a universal interface.

The housings also engineered with an advanced metal-reinforced composite designed to withstand inadvertent drops and the effects of fluid and chemical spills typical in the harsh environments of manufacturing plants and automotive shops....more

Lion Precision launches new Displacement Sensor

Lion Precision introduces new ECL101 Eddy-Current Displacement Sensor, which consists of a probe with integral coaxial cable and a driver which operates on 12-24VDC and produces 0-10VDC, and 0-20mA outputs which are linearly proportional to the distance between the probe and the target being sensed.

The new ECL101 displacement sensor is an improved and CE compliant version of sensors. The ECL101 non-contact sensor offers improvements in immunity to electromagnetic interference (EMI) and thermal stability as well as lower power consumption. The linear output sensor is available with a selection of probes offering measurement ranges from 0.5mm to 15mm, and features a unique front panel range indicator to alert the operator to out-of-range conditions.

The displacement sensor has applications in any industry requiring precision non-contact displacement measurement, especially in a hostile environment involving fluids or debris in the measurement area....more

Fluid Metering launches new Programmable Dispensing System

The new PDS100 Programmable Dispensing System from Fluid Metering uses precision stepper motors to control a variety FMI’s patented valve-less piston pumps. The PDS100 has a range from 500 nanolitres per dispense to 2 litres per minute continuous flow. It will accommodate all FMI pump sizes in both fixed and adjustable displacement configurations.

The pump heads are integrally mounted to the control unit which is housed in rugged anodized aluminium enclosure. The control unit includes the stepper motor drives as well as programmable driver electronics. The front face of the enclosure has an LED readout used to display menu driven programming, as well as membrane switches for navigating through the programming steps.

The PDS100 can be configured to control either one or two pump heads.  In configurations with 2 pump heads, each pump can be controlled independently for dual proportional dispensing & metering or synchronized to produce a smooth, pulse-less flow....more

New RF Power Meter from Agilent

Agilent Technologies Inc. announced the release of the new V3500A Handheld RF Power Meter, the latest addition to its industry-leading range of power meters and power sensors. The palm-sized V3500A power meter includes a built-in display and integrated power sensor. The meter is an ideal and affordable power measurement solution for installation and maintenance environments, as well as for the R&D lab.

The V3500A power meter features a broad frequency range of 10MHz to 6GHz, a wide dynamic range of -63dBm to +20dBm, and absolute accuracy up to ±0.21dB.

The V3500A is packed with essential average power measurement capabilities, which provides good repeatability and accurate measurements. The meter simplifies field tasks and provides typical power measurements while ensuring lower startup costs....more

Jatropha: An Alternative to Diesel and Petrol?

The rising international oil price, lack of alternative and heavy dependence of Indian economy on petroleum, the growing concerns over environmental pollution and global warming, and the ratio of petroleum in the total import cost of the country, have made it extremely important for the government to take serious steps towards achieving energy security based on green fuel in near future. Keeping these considerations in mind the government started giving serious thought to the idea of "Bio Diesel" and looking for new substitute to petrol and diesel.

What is Jatropha curcas?
Jatropha curcas is the most appropriate Tree Borne Oil (TBO) seed plant for production of biodiesel both in view of the non-edible oil available from it and its presence throughout the country. The other advantage of Jatropha is - it's pollution-free and is non-toxic. It is 100% natural, bio degradable supplement for diesel. Moreover, the cultivation of Jatropha crop doesn't need much of effort. All it needs is soil depth of 1.5 to 2 ft. and minimum annual rainfall of 600 mm.

Is it a genuine substitute?
The ever increasing demand of diesel & petrol and continuous rise in prices has forced us to look for ecologically sustainable alternative energy source. In this quest, biodiesel (prepared from renewable resources, i.e. vegetable oil (edible or non edible) and animal fat) has emerged as a viable alternative. As India is already deficit in edible oil requirement, non-edible oil may be material of choice for producing biodiesel. For this purpose Jatropha curcas is considered as most potential source.

What are the benefits?
The non-edible oil of Jatropha has requisite potential of providing a promising and commercially viable alternative to diesel as it has the desired physio-chemical and performance characteristic comparable to petro-diesel. Jatropha oil has higher cetone number (51) compared to other oils, which is comparable to diesel (46 to 50) and makes it an ideal alternative fuel and requires no modification in the engine.
The initial flash point of Jatropha oil is 1000°C as compared to 500°C in case of diesel. Due to higher flashpoint, it has advantage over conventional petroleum product such as more safety during storage, handling and transportation.


Jatropha: The Future Indian Biodiesel Feedstock

Demag's Pre-engineered Overhead Crane Kits

Demag Cranes & Components has introduced Pre-engineered Single Girder Overhead Crane Kits in either top running or under running configurations that allow installers to do their own on-site crane assembly. The kits are shipped complete with all necessary components except the steel beams, which can be purchased locally to save freight cost.

The Crane kit comes complete with all components including a wire rope hoist, end trucks, bridge panel, festoon system with brackets and push button station. All kits are “plug-&-play” and no electrical work is required. The kits can typically be assembled in less than 21 hours, an extremely fast rate for the crane industry.

All of the components in the kits are manufactured by Demag to extremely tight tolerances. This ensures quick and trouble-free assembly, structural integrity, longer service life and reduced maintenance requirements...more

Portable GPS & Galileo Positional Simulator – GPSG-1000

Aeroflex has launched portable GPS and Galileo Positional Simulator – GPSG-1000, which is lightweight, easy to use, configurable, and inexpensive. The product provides a low-cost 12-channel test set that creates three-dimensional simulations.

The GPSG-1000 supports civil and military avionics field and bench maintenance technicians, production test technicians, and system integrators with a modern simulator for L1, C/A code and L1C, L2C, L5 GPS modernization signals, as well as new Galileo E1, E5, E6 services.

This innovative product can be configured with single channel, 6-channel, or 12-channel simulation. Typical tests include acquisition sensitivity, tracking sensitivity, time-to-first-fix for cold/warm/hot starts, time-to-second-fix, positional accuracy, RAIM failure tolerance, and subsystem stimulation for 3D flight execution.

The Aeroflex GPSG-1000 uses modular technology for RF and baseband signal generation to produce highly accurate and repeatable test results. Aeroflex’s approach also allows the test system to be easily upgraded at low cost....more